12 limilimithara

  • 12MM tšepe e ncha Stainless tšepe ea nakoana kapa latching push konopo switjha e nang le lesale la LED leseli PM125F(H)-10E/S

    12MM tšepe e ncha Stainless tšepe ea nakoana kapa latching push konopo switjha e nang le lesale la LED leseli PM125F(H)-10E/S

    1 2

     

    Nomoro ea karolo:PM125F-11E/S PM125H-11E/S

    Kenya bophara: 12mm

    Sebopeho: Hlooho e bataletseng kapa hlooho e phahameng

    mosebetsi: 10NO

    hona joale: 2A/36V DC

    Leseli la lesale la LED Mobala: khubelu, e tala, e mosehla, e putsoa, ​​​​e tšoeu

    Mosebetsi: Nakoana (1NO1NC) kapa latching (1NO1NC)

    Terminal: Pin terminal

    Crust material: Tshipi e senang tshepe

    Boemo ba IP: IP65

    Mocheso: - 25 ho isa ho 55 Degree

     

  • 12MM tšepe e ncha Stainless steel ea nakoana kapa latching push button switch ntle le khanya

    12MM tšepe e ncha Stainless steel ea nakoana kapa latching push button switch ntle le khanya

    1

     

    Nomoro ea karolo:PM125F-11/S PM125H-11/S

    Kenya bophara: 12mm

    Sebopeho: Hlooho e bataletseng kapa hlooho e phahameng

    mosebetsi: 10NO

    hona joale: 2A/36V DC

    Leseli la lesale la LED Mmala: HA HO lebone

    Mosebetsi: Nakoana (1NO1NC) kapa latching (1NO1NC)

    Terminal: Pin terminal

    Crust material: Tshipi e senang tshepe

    Boemo ba IP: IP65

    Mocheso: - 25 ho isa ho 55 Degree

  • ELEWIND 12mm High dome push konopo ea hlooho (PM121G-10/R/A)

    ELEWIND 12mm High dome push konopo ea hlooho (PM121G-10/R/A)

    1

     

    switjha konopo ea hlooho ea dome (PM121G-10/R/A)

    Nomoro ea karolo:PM121G-10/R/A

    Kenya bophara: 12mm

    Tekanyo ea phetoho: 2A/36VDC

    Sebopeho: Hlooho e phahameng e nang le taolo

    'Mala oa konopo: Khubelu

    (Mmala o mong oo u ka o khethang bakeng sa Botala, Bosehla, Bokhubelu, Bosoeu le Botsho)

    Mosebetsi: Nakoana (1NO)

    Terminal: screw terminal

    Lintho tse ka holimo: Aluminium ALLOY

    Boemo ba IP: IP65

    Mocheso: - 40 ho isa ho 75 Degree

  • ELEWIND 12mm 'mele o mokhuts'oane o khahlano le vandali o khantšitseng lets'oao la ho sutumetsa konopo (PM121F-10DT/J/R/12V/S)

    ELEWIND 12mm 'mele o mokhuts'oane o khahlano le vandali o khantšitseng lets'oao la ho sutumetsa konopo (PM121F-10DT/J/R/12V/S)

    1 2

     

    Nomoro ea karolo:PM121F-10DT/J/R/12V/S

    Kenya bophara: 16mm

    Tekanyo ea phetoho: 2A/36VDC

    Sebopeho: Hlooho e bataletseng

    Mosebetsi: Nakoana (1NO)

    Terminal: 4 Pin terminal

    Crust material: tshepe e senang tshepe

    Mmala oa LED: Letšoao la matla a bonesitsoeng, 'mala o na le: Bofubelu, boputsoa, ​​​​Botala, Bosehla, Bosoeu, Orange

    Matla: ho tloha ho 1.8V ho isa ho 48V

    Boemo ba IP: IP65

    Mocheso: - 40 ho isa ho 75 Degree

  • ELEWIND 12mm latching on-off mofuta oa tšepe e sa hloekang e nang le selikalikoe Lebone le khantšitsoeng ka konopo ea konopo (PM123H-10ZE/J/S)

    ELEWIND 12mm latching on-off mofuta oa tšepe e sa hloekang e nang le selikalikoe Lebone le khantšitsoeng ka konopo ea konopo (PM123H-10ZE/J/S)

    406

     

    1. lentsoe la bohlokoa: 12mm tšepe Stainless steel tobetsa konopo

    2. MOQ:1 sengoathoana

    3. Lisebelisoa tsa hlooho: tšepe e sa hloekang

    4. Mofuta oa hlooho:Phahameng hlooho

    5. Libaka tsa kopo: mechine, lisebelisoa tsa indasteri, lijo, lifofane, matla a macha, bongaka, li-automation, likepe tse tsamaeang ka sekepe le liindasteri tse ling.

    6. Molemo:1NO Stainless steel e nang le selikalikoe se khantšitsoeng ka konopo ea konopo ea khanya e khanyang

    7. Mekhoa ea ho romela thepa: DHL / UPS / Fedex le tse ling tsa machaba Express

     

     

    Kenyelletso ea sehlahisoa:

    Ka boiteko ba lintho tsohle, li-buttons tsa tšepe li ntlafala ho

    letoto le eketsehileng le mefuta e mengata, 'me butle-butle ba amoheloa ke

    likhoebo tse tsebahalang lapeng le kantle ho naha (haholo-holo tse ling tse kholo

    likhoebo tse pharalletseng Europe le Amerika).Tobetsa likonopo

    li sebelisoa haholo lisebelisoa tse kholo tsa mochini, armaria, automo

    ts'ebetso ea bile, lisebelisoa tsa ho hlapela ka kamoreng ea ho hlapela, lisebelisoa tsa ofisi,

    mokhabiso oa hotele, sehlahisoa sa kantle sa dijithale le lisebelisoa tsa komporo.

     

    Ha re ntse re thabela tlhompho le katleho, ha re ikhohomose ebile ha re felle pelo, re tsoela pele ho ntlafatsa, e le ho rala motheo o tiileng bakeng sa hosane e babatsehang, re tšoara litlhoko tsa bareki ka tieo, ka lihlahisoa tse babatsehang le litšebeletso tsa boleng ba ho hapa 'maraka, re tsoela pele ho leka ka matla. ho ntšetsa peleELEWINDbrand ho lefatshe.Ho fokotsa matla a macha, ho bula moralo o mocha, ho jara boikarabelo le boikarabello, ho tsoela pele ka litoro le botšepehi, ho ea bokamosong bo hlollang haholoanyane.

    Lihlahisoa tsa rona li rekisitsoe ho30linaha ho pota lefatše, 'me re tletse thoriso bakeng sa boleng ba tsona.Re tla fa moreki e mong le e mong ka pelo eohle litšebeletso le lihlahisoa tsa boleng bo holimo, 'me re lebelletse ho sebelisana le uena

     

    Lihlahisoa tsa lihlahisoa:

    PM123H-10ZE/J/S

    Φ12mm bophara

    Boemo ba ho fetoha: 1A/36VDC

    Tlhophiso ea ho Kopana: 1NO

    Mofuta oa ts'ebetso: latching

    Mofuta oa Theminale(◆):Pin Terminal

    Thepa ea shell:Ts'epe e sa beng le mabali

    'Mala o khanyang: boputsoa bo boputsoa bo botala bo bosehla bo bosoeu ba lamunu

    IP Degree: IP40

  • ELEWIND 12mm e nyane / e nyane ea nakoana kapa ea mofuta oa tšepe ea tšepe e sa tsitsang ntle le konopo ea konopo e khanyang (PM12H-11/S)

    ELEWIND 12mm e nyane / e nyane ea nakoana kapa ea mofuta oa tšepe ea tšepe e sa tsitsang ntle le konopo ea konopo e khanyang (PM12H-11/S)

    406

     

    1. lentsoe la bohlokoa: 12mm tšepe Stainless steel tobetsa konopo

    2. MOQ:1 sengoathoana

    3. Lisebelisoa tsa hlooho: tšepe e sa hloekang

    4. Mofuta oa hlooho:Phahameng hlooho

    5. Libaka tsa kopo: mechine, lisebelisoa tsa indasteri, lijo, lifofane, matla a macha, bongaka, li-automation, likepe tse tsamaeang ka sekepe le liindasteri tse ling.

    6. Molemo:1NO1NC Stainless steel push konopo

    7. Mekhoa ea ho romela thepa: DHL / UPS / Fedex le tse ling tsa machaba Express

     

     

    Kenyelletso ea sehlahisoa:

    Ka boiteko ba lintho tsohle, li-buttons tsa tšepe li ntlafala ho

    letoto le eketsehileng le mefuta e mengata, 'me butle-butle ba amoheloa ke

    likhoebo tse tsebahalang lapeng le kantle ho naha (haholo-holo tse ling tse kholo

    likhoebo tse pharalletseng Europe le Amerika).Tobetsa likonopo

    li sebelisoa haholo lisebelisoa tse kholo tsa mochini, armaria, automo

    ts'ebetso ea bile, lisebelisoa tsa ho hlapela ka kamoreng ea ho hlapela, lisebelisoa tsa ofisi,

    mokhabiso oa hotele, sehlahisoa sa kantle sa dijithale le lisebelisoa tsa komporo.

     

    Ha re ntse re thabela tlhompho le katleho, ha re ikhohomose ebile ha re felle pelo, re tsoela pele ho ntlafatsa, e le ho rala motheo o tiileng bakeng sa hosane e babatsehang, re tšoara litlhoko tsa bareki ka tieo, ka lihlahisoa tse babatsehang le litšebeletso tsa boleng ba ho hapa 'maraka, re tsoela pele ho leka ka matla. ho ntšetsa peleELEWINDbrand ho lefatshe.Ho fokotsa matla a macha, ho bula moralo o mocha, ho jara boikarabelo le boikarabello, ho tsoela pele ka litoro le botšepehi, ho ea bokamosong bo hlollang haholoanyane.

    Lihlahisoa tsa rona li rekisitsoe ho30linaha ho pota lefatše, 'me re tletse thoriso bakeng sa boleng ba tsona.Re tla fa moreki e mong le e mong ka pelo eohle litšebeletso le lihlahisoa tsa boleng bo holimo, 'me re lebelletse ho sebelisana le uena

     

    Lihlahisoa tsa lihlahisoa:

    PM12H-11/S

    Φ12mm bophara

    Boemo ba ho fetoha: 1A/36VDC

    Tlhophiso ea ho Kopana: 1NO1NC

    Mofuta oa Ts'ebetso: Nakoana kapa ho phunya

    Mofuta oa Theminale(◆):Pin Terminal

    Thepa ea shell:Ts'epe e sa beng le mabali

    IP Degree: IP40

  • ELEWIND 12mm e nyane / e nyane ea nakoana kapa ea tšepe ea mofuta oa tšepe ea tšepe e sa hloekang e nang le selikalikoe Lebone le khantšitsoeng ka konopo ea konopo (PM122H-11E/S)

    ELEWIND 12mm e nyane / e nyane ea nakoana kapa ea tšepe ea mofuta oa tšepe ea tšepe e sa hloekang e nang le selikalikoe Lebone le khantšitsoeng ka konopo ea konopo (PM122H-11E/S)

    406

     

    1. lentsoe la bohlokoa: 12mm tšepe Stainless steel tobetsa konopo

    2. MOQ:1 sengoathoana

    3. Lisebelisoa tsa hlooho: tšepe e sa hloekang

    4. Mofuta oa hlooho:Phahameng hlooho

    5. Libaka tsa kopo: mechine, lisebelisoa tsa indasteri, lijo, lifofane, matla a macha, bongaka, li-automation, likepe tse tsamaeang ka sekepe le liindasteri tse ling.

    6. Molemo:1NO1NC tšepe e sa hloekang e nang le selikalikoe se khantšitsoeng ka konopo ea konopo e khanyang

    7. Mekhoa ea ho romela thepa: DHL / UPS / Fedex le tse ling tsa machaba Express

     

     

    Kenyelletso ea sehlahisoa:

    Ka boiteko ba lintho tsohle, li-buttons tsa tšepe li ntlafala ho

    letoto le eketsehileng le mefuta e mengata, 'me butle-butle ba amoheloa ke

    likhoebo tse tsebahalang lapeng le kantle ho naha (haholo-holo tse ling tse kholo

    likhoebo tse pharalletseng Europe le Amerika).Tobetsa likonopo

    li sebelisoa haholo lisebelisoa tse kholo tsa mochini, armaria, automo

    ts'ebetso ea bile, lisebelisoa tsa ho hlapela ka kamoreng ea ho hlapela, lisebelisoa tsa ofisi,

    mokhabiso oa hotele, sehlahisoa sa kantle sa dijithale le lisebelisoa tsa komporo.

     

    Ha re ntse re thabela tlhompho le katleho, ha re ikhohomose ebile ha re felle pelo, re tsoela pele ho ntlafatsa, e le ho rala motheo o tiileng bakeng sa hosane e babatsehang, re tšoara litlhoko tsa bareki ka tieo, ka lihlahisoa tse babatsehang le litšebeletso tsa boleng ba ho hapa 'maraka, re tsoela pele ho leka ka matla. ho ntšetsa peleELEWINDbrand ho lefatshe.Ho fokotsa matla a macha, ho bula moralo o mocha, ho jara boikarabelo le boikarabello, ho tsoela pele ka litoro le botšepehi, ho ea bokamosong bo hlollang haholoanyane.

    Lihlahisoa tsa rona li rekisitsoe ho30linaha ho pota lefatše, 'me re tletse thoriso bakeng sa boleng ba tsona.Re tla fa moreki e mong le e mong ka pelo eohle litšebeletso le lihlahisoa tsa boleng bo holimo, 'me re lebelletse ho sebelisana le uena

     

    Lihlahisoa tsa lihlahisoa:

    PM122H-11E/S

    Φ12mm bophara

    Boemo ba ho fetoha: 1A/36VDC

    Tlhophiso ea ho Kopana: 1NO1NC

    Mofuta oa Ts'ebetso: Nakoana kapa ho phunya

    Mofuta oa Theminale(◆):Pin Terminal

    Thepa ea shell:Ts'epe e sa beng le mabali

    'Mala o khanyang: boputsoa bo boputsoa bo botala bo bosehla bo bosoeu ba lamunu

    IP Degree: IP40

  • ELEWIND 12mm tšepe ea nakoana Stainless steel 10NO bell push konopo switch, PM121B-10/S

    ELEWIND 12mm tšepe ea nakoana Stainless steel 10NO bell push konopo switch, PM121B-10/S

    1

     

    Kenyelletso ea sehlahisoa:

    Konopo ea tšepe ea tšepe, e ntlafalitsoeng ka bonngoe ke k'hamphani ea rona,

    e na le litokelo tse ngata tsa thepa ea mahlale.Ho na le

    mefuta e mengata, joalo ka sesupo, konopo ea push, konopo ea latching push,

    konopo ea ho tobetsa e bonesitsoeng, mokhethoa, mokhethoa o bonesitsoeng, senotlolo

    switjha, sesebelisoa sa ho emisa tšohanyetso le buzzer.

    Ka boiteko ba lintho tsohle, li-buttons tsa tšepe li ntlafala ho

    letoto le eketsehileng le mefuta e mengata, 'me butle-butle ba amoheloa ke

    likhoebo tse tsebahalang lapeng le kantle ho naha (haholo-holo tse ling tse kholo

    likhoebo tse pharalletseng Europe le Amerika).Tobetsa likonopo

    li sebelisoa haholo lisebelisoa tse kholo tsa mochini, armaria, automo

    ts'ebetso ea bile, lisebelisoa tsa ho hlapela ka kamoreng ea ho hlapela, lisebelisoa tsa ofisi,

    mokhabiso oa hotele, sehlahisoa sa kantle sa dijithale le lisebelisoa tsa komporo.

    IP degree:

    Ha ho bapisoa le lihlahisoa tsa polasetiki, lihlahisoa tsa tšepe eseng feela

    etsa ntlafatso ho degree ea IK, empa hape u hatele pele ho IP

    tekanyo.Lihlahisoa tse ngata li fihlile ho Ip65, 'me tse ling li se li fihlile

    e fihletse IP67(Ho inela ka nako e khuts'oane) esita le boemo bo phahameng haholo.

    'Me bareki ba bangata ba bitsa lihlahisoa "konopo e thibelang metsi".

     

    Tsebiso ea ho Welding Pin:

    Ts'ebetso efe kapa efe e fosahetseng ea welding kaofela e ka baka tšenyo

    ho deformation polasetiki, mpe-contact switjha ect.Ha soldering

    li-pin-terminals tsa li-switches le mabone a pontšo, re lokela ho lefa

    ela hloko lintlha tse latelang.Hobane ho bonolo ho ba le

    switjha e senyehile haeba e sa sebetse hantle.

    1.Ho sebelisa tšepe e loketseng ea solder ea motlakase le welding e potlakileng

    lebelo.Re fana ka maikutlo a hore u sebelise tšepe ea 30W ea ho kopanya motlakase 'me u qete

    nakong ea metsotsoana e 2 ha e fihla ho 320.

    2.Ho sebelisa palo e nepahetseng ea phofo ea scaling le ho beha li-pinterminals

    tlase ha ho soasoa.

    1. Ho molemo ho sebelisa likhokahano ho e-na le ho tjheseletsa ka kotloloho

     

    Letšoao le ikhethileng:

    E 'nile ea e-ba mokhoa oa laser ho betla sebopeho le ho saena kapa

    Customize mabone tlhaku le ho saena ka holim'a tšepe push

    konopo.Sebaka sa tšepe se ikhethileng se etsa hore sehlahisoa se be sa motho ka mong,

    mme e bile mokgwa o motjha.

     

     

     

    Hlokomela:

    Pls e re fa karolo ea nomoro e felletseng ha o odara.

    Colourized crust of aluminium material is available for all above

    lihlahisoa.

    Haeba o hloka lihlahisoa tse entsoeng ho odara, MOQ ke likotoana tse 500.

    Tekanyo ea IP e sebelisoa bakeng sa bokaholimo ba phanele.

    Ho hlokahala tefiso e eketsehileng bakeng sa odara e ka tlase ho likotoana tse 500.

     

    Phetoho ea tlhahiso:

    Li-ion tsohle tse hlakileng le lipapiso li ka fetoha

    ntle le tsebiso pele.

     

     

    Lihlahisoa tsa lihlahisoa:

    PM121B-10/

    Φ12mm bophara

    Boemo ba ho fetoha: 2A/36VDC

    Tlhophiso ea ho Kopana: 1NO

    Mofuta oa Ts'ebetso: Nakoana

    Mofuta oa Terminal (◆): Screw Terminal/ Pin Terminal(J)

    Tšepe(S)/Nickel Plated Brass(N)

    IP Degree: IP65 IK08

  • ELEWIND 'mele o motšo oa aluminium o mebala-bala oa 1NO oa konopo ea tšepe (PM121B-10/A)

    ELEWIND 'mele o motšo oa aluminium o mebala-bala oa 1NO oa konopo ea tšepe (PM121B-10/A)

    406

     

     

    Kenyelletso ea sehlahisoa:

    Konopo ea tšepe ea tšepe, e ntlafalitsoeng ka bonngoe ke k'hamphani ea rona,

    e na le litokelo tse ngata tsa thepa ea mahlale.Ho na le

    mefuta e mengata, joalo ka sesupo, konopo ea push, konopo ea latching push,

    konopo ea ho tobetsa e bonesitsoeng, mokhethoa, mokhethoa o bonesitsoeng, senotlolo

    switjha, sesebelisoa sa ho emisa tšohanyetso le buzzer.

    Ka boiteko ba lintho tsohle, li-buttons tsa tšepe li ntlafala ho

    letoto le eketsehileng le mefuta e mengata, 'me butle-butle ba amoheloa ke

    likhoebo tse tsebahalang lapeng le kantle ho naha (haholo-holo tse ling tse kholo

    likhoebo tse pharalletseng Europe le Amerika).Tobetsa likonopo

    li sebelisoa haholo lisebelisoa tse kholo tsa mochini, armaria, automo

    ts'ebetso ea bile, lisebelisoa tsa ho hlapela ka kamoreng ea ho hlapela, lisebelisoa tsa ofisi,

    mokhabiso oa hotele, sehlahisoa sa kantle sa dijithale le lisebelisoa tsa komporo.

    IP degree:

    Ha ho bapisoa le lihlahisoa tsa polasetiki, lihlahisoa tsa tšepe eseng feela

    etsa ntlafatso ho degree ea IK, empa hape u hatele pele ho IP

    tekanyo.Lihlahisoa tse ngata li fihlile ho Ip65, 'me tse ling li se li fihlile

    e fihletse IP67(Ho inela ka nako e khuts'oane) esita le boemo bo phahameng haholo.

    'Me bareki ba bangata ba bitsa lihlahisoa "konopo e thibelang metsi".

     

    Tsebiso ea ho Welding Pin:

    Ts'ebetso efe kapa efe e fosahetseng ea welding kaofela e ka baka tšenyo

    ho deformation polasetiki, mpe-contact switjha ect.Ha soldering

    li-pin-terminals tsa li-switches le mabone a pontšo, re lokela ho lefa

    ela hloko lintlha tse latelang.Hobane ho bonolo ho ba le

    switjha e senyehile haeba e sa sebetse hantle.

    1.Ho sebelisa tšepe e loketseng ea solder ea motlakase le welding e potlakileng

    lebelo.Re fana ka maikutlo a hore u sebelise tšepe ea 30W ea ho kopanya motlakase 'me u qete

    nakong ea metsotsoana e 2 ha e fihla ho 320.

    2.Ho sebelisa palo e nepahetseng ea phofo ea scaling le ho beha li-pinterminals

    tlase ha ho soasoa.

    1. Ho molemo ho sebelisa likhokahano ho e-na le ho tjheseletsa ka kotloloho

     

    Letšoao le ikhethileng:

    E 'nile ea e-ba mokhoa oa laser ho betla sebopeho le ho saena kapa

    Customize mabone tlhaku le ho saena ka holim'a tšepe push

    konopo.Sebaka sa tšepe se ikhethileng se etsa hore sehlahisoa se be sa motho ka mong,

    mme e bile mokgwa o motjha.

     

     

     

    Hlokomela:

    Pls e re fa karolo ea nomoro e felletseng ha o odara.

    Colourized crust of aluminium material is available for all above

    lihlahisoa.

    Haeba o hloka lihlahisoa tse entsoeng ho odara, MOQ ke likotoana tse 500.

    Tekanyo ea IP e sebelisoa bakeng sa bokaholimo ba phanele.

    Ho hlokahala tefiso e eketsehileng bakeng sa odara e ka tlase ho likotoana tse 500.

     

    Phetoho ea tlhahiso:

    Li-ion tsohle tse hlakileng le lipapiso li ka fetoha

    ntle le tsebiso pele.

     

     

    Lihlahisoa tsa lihlahisoa:

    PM121B-10/

    Φ12mm bophara

    Boemo ba ho fetoha: 2A/36VDC

    Tlhophiso ea ho Kopana: 1NO

    Mofuta oa Ts'ebetso: Nakoana

    Mofuta oa Terminal (◆): Screw Terminal/ Pin Terminal(J)

    Lintho tse bonahalang: aluminium e ntšo

    Konopohloohommala: Botalakhubelu bosoeu bo mosehla mmala wa lamunu boputsoa bo botsho

  • ELEWIND 12mm konopo ea tšepe ea tšepe e fetola nakoana 1NO e nang le lebone la selikalikoe (PM121F-10E-S)

    ELEWIND 12mm konopo ea tšepe ea tšepe e fetola nakoana 1NO e nang le lebone la selikalikoe (PM121F-10E-S)

    Konopo ea tšepe ea tšepe, e ntlafalitsoeng ka bonngoe ke k'hamphani ea rona, e na le litokelo tse ngata tsa thepa ea mahlale.Ho na le mefuta e mengata, joalo ka sesupo, konopo ea push, konopo ea latching push, illuminated push button, selector, sekhethi se bonesitsoeng, senotlolo sa senotlolo, switch stop stop le buzzer.
    Ka boiteko ba lintho tsohle, li-buttons tsa tšepe li fetoha letoto le mefuta e mengata, 'me butle-butle li amoheloa ke likhoebo tse tsebahalang lapeng le kantle ho naha (haholo-holo likhoebo tse kholo tse akaretsang Europe le Amerika).Li-button tsa li-push li sebelisoa haholo lisebelisoa tse kholo tsa mochini, li-armaria, ts'ebetso ea bile ea koloi, lisebelisoa tsa ho hlapela ka kamoreng ea ho hlapela, lisebelisoa tsa ofisi, mokhabiso oa hotele, sehlahisoa sa kantle sa dijithale le lisebelisoa tsa komporo.